ID-52E
New product
Handheld DSTAR VHF/UHF
Multi-Function VHF/UHF Digital with Colour Display and Bluetooth® - IPX7
This product is no longer in stock
Availability date:
By buying this product you can collect up to 5 loyalty points. Your cart will total 5 loyalty points that can be converted into a voucher of 5,00 €.
Frequency coverage (Unit: MHz) | Version | Transmit | Receiver | Broadcast band |
---|---|---|---|---|
EUR | 144–146, 430–440 |
(A) 108–174, 225–479* (B) 137–174, 375–479* |
76.0–108.0 |
|
(A) means A band, (B) means B band. Guaranteed range: * 144–146, 430–440 MHz | ||||
Type of emission | F2D, F3E, F7W | |||
Mode | DV, FM, FM-N, WFM*, AM*, AM-N* (* WFM, AM and AM-N are Rx only) |
|||
Number of memory channels | 1000 memory channels, 4 call channels, 50 scan edges, 100 skip channels, 500 broadcast stations, 2500 repeaters, 300 call signs and 300 GPS memories |
|||
Frequency resolution | 5, 6.25, 8.33*, 10, 12.5, 15, 20, 25, 30, 50, 100, 125 and 200 kHz * Selectable depending on the operating band. |
|||
Operating temperature range | –20℃ to +60℃ ; –4°F to +140°F | |||
Frequency stability | ±2.5 ppm (–20℃ to +60℃ on the basis of 25℃) | |||
Antenna impedance | 50 Ω (SMA) | |||
Power supply requirement | Battery pack | 7.4 V DC (with BP-272), 7.2 V DC (with BP-307) | ||
Alkaline cells | 5.5 V DC (with BP-273) | |||
External DC | 10–16 V DC | |||
Current drain (at 7.4 V DC) | Tx High | Less than 2.5 A | ||
Rx AF Max. | Less than 450 mA (DV), Less than 400 mA (FM, FM-N) (Internal SP, 8 Ω) |
|||
Dimensions (W×H×D) (projections not included) |
61.1 × 121.6 × 29.7 mm (main unit) 61.1 × 121.6 × 34.8 mm (with BP-272) |
|||
Weight (approx.) | 330 g (with BP-272 & antenna) |
Modulation system | DV | GMSK reactance modulation, |
---|---|---|
FM, FM-N | FM reactance modulation | |
Output power (at 7.4 V DC) | 5 W, 2.5 W, 1.0 W, 0.5 W, 0.1 W (High, Mid, Low2, Low1, S-low) |
|
Spurious emissions | Less than –60 dBc (High, Mid), Less than –13 dBm (Low2, Low1, S-low) |
|
Max. frequency deviation | ±5.0/2.5 kHz (FM/FM-N) | |
Ext. Mic impedance | 2.2 kΩ |
Sensitivity | DV | Less than 0.2 μV (at 1% BER) | |||
---|---|---|---|---|---|
FM, FM-N | Less than 0.18 μV (at 12 dB SINAD) | ||||
Selectivity | More than 50 dB (DV, FM-N), More than 55 dB (FM) | ||||
Spurious rejection | More than 60 dB | ||||
Audio output power | Internal SP | More than 750 mW (8 Ω load) | |||
External SP | More than 200 mW (8 Ω load) | ||||
Receiver sensitivity (Except amateur bands.) | |||||
Frequency range (Unit: MHz) |
FM/FM-N/WFM (12 dB SINAD) | AM/AM-N (10 dB S/N) |
|||
BC band | 76.000–108.000 | Less than 1 μV (WFM) | ー | ||
A band | 108.000 – 136.991 | ー | Less than 1 μV | ||
137.000 – 142.000 | Less than 0.18 μV | Less than 1 μV | |||
142.005 – 148.000 | Less than 0.18 μV | ー | |||
148.005 – 174.000 | Less than 0.32 μV | ー | |||
225.000 – 259.995 | Less than 0.56 μV | Less than 1.8 μV* | |||
260.000 – 354.995 |
Less than 0.32 μV | Less than 1 μV* | |||
355.000 – 374.995 | Less than 0.5 μV | Less than 1.8 μV* | |||
375.000 – 399.995 | Less than 0.5 μV | ー | |||
400.000 – 479.000 | Less than 0.32 μV | ー | |||
B band | 137.000 – 148.000 | Less than 0.18 μV | ー | ||
148.005 – 174.000 | Less than 0.32 μV | ー | |||
375.000 – 399.995 | Less than 0.5 μV | ー | |||
400.000 – 479.000 | Less than 0.32 μV | ー |
*AM-N mode cannot be received from 225 to 374.995 MHz.
All stated specifications are subject to change without notice or obligation.
* Supplied accessories may differ depending on the transceiver version.
The ID-52E is a VHF/UHF dual band radio with D-STAR and FM dual mode functions.
The ID-52E supports conventional FM communications as well as D-STAR simplex, repeater, regional, and worldwide calls over the D-STAR Internet gateway.
With the ID-52E, you can call a friend in another city, or even internationally through D-STAR repeaters, with digital clear audio. In addition, the ID-52E can send digital voice with data, text messages, GPS location information and pictures.
The expanded DR (D-STAR Repeater) function makes D-STAR and FM repeater communication easier to use.
Combined with the GPS function, selection of an available local repeater is available with a couple of button pushes, based on your location.
Additionally, DR mode supports reflector linking controls.
Connect the ID-52E to the Internet through a Windows® PC or an Android™ device.
The Internet gateway (using Terminal mode and Access Point mode) enables you to access the D-STAR repeater network, even from areas where no D-STAR repeater is directly accessible via radio.
・ Terminal and Access Point modes are compatible with Icom RS-RP3 Gateway Software.
If your D-STAR repeater is running G1 or G2 software, please contact your local Icom Distributor to upgrade software.
・You need an Internet connection with an IPv4 Global IP address.
If you use a cellular system, you need an IPv4 Global IP address assigned to your Android™ device.
・The RS-MS3W optional software is required to be installed in the PC (Download from Icom website).
The RS-MS3A optional application software is required to be installed in the Android™ device (Download from Google Play™).
USB cable is required. Type-A: User supplied.
Type-C: OPC-2418. micro-B: OPC-2417.
The ID-52E features a 2.3 inch colour display (320 × 280 pixels) which provides excellent viewability.
The display background colour is selectable from black and white.
The optional VS-3 Bluetooth® headset enables hands-free wireless operation. In addition to the PTT and volume up/down buttons,
The VS-3 has three programmable buttons that can be assigned functions to improve operation.
You can connect to a smart device through Bluetooth®.
The Remote Control Software, RS-MS1A for Android™ device or RS-MS1I for iOS™ device can wirelessly control the ID-52E to change operating frequencies and other settings.
The waterfall display shows not only the existence of signals but also the changes of signal level in chronological order.
You will have an overview of the band conditions in more detail, including busy frequencies currently used, or open frequencies not used.
The band scope mode is selectable from center mode, Fixed mode and Fixed scroll mode.
The Dualwatch function monitors the VHF/VHF, UHF/UHF and VHF/UHF bands simultaneously*.
You can quickly respond to a call from the Main and Sub bands.
Two DV signals can be decoded at the same time.
AM/AM mode Dualwatch is not possible.
AM signals can be received on only the Main VFO (A band).
Airband reception is expanded from VHF to UHF military airband (225 to 374.995 MHz).
FM broadcast stations can be listened to while using the dualwatch function
Broadcast Receiver
.
D-PRS mode is supported by the internal GPS receiver for sending your location and showing received station location, distance, and direction from your current location.
In addition to your location, the ID-52E displays your current Grid Square information.
The GPS position data can be used for Position Auto Reply, Near Repeater Search, and GPS log functions.
You can store QSO Recording,
TX Voice Memory, pictures, QSOs and GPS log data.
Firmware upgrades,
Repeater lists and other personal settings onto a microSD card (up to 32 GB).
This can then be uploaded into the ID-52E radio.
The ID-52E has a Multi-function USB port as well as USB host function, for charging the Icom battery packs, PC Programming, read/write contents to the microSD card,
Terminal/Access Point mode support, as well as CI-V control as well as audio.
IPX7 waterproofing and pro-grade construction make the ID-52E ideal for operating in harsh outdoor environments.
No customer reviews for the moment.