ACOM 1010 - 700W PEP - HF - 160 to 10 M

ACOM 1010 specifications:


• Frequency Coverage: All amateur bands in the 1.8-29.7MHz frequency range; extensions and/or changes on request.

•Power Output: 700 W PEP or 500 W continuous carrier.

•Intermodulation Distortion: Better than 35 dB below rated output.

• Hum and noise: Better than 40 dB below rated output.

• Harmonic Output Suppression: Better than 50 dB below rated output.

• Input and Output Impedances:

   - nominal value: 50 Ohm unbalanced, UHF (SO239) type connectors;

   - input circuit: broadband, VSWR less than 1.3:1, 1.8-30MHz continuously (no tunings, no switching);

   - Bypass path VSWR less than 1.1:1, 1.8-30MHz continuously, 200 W maximum;

   - Output (antenna) impedance matching capability: VSWR up to 3:1 or higher.

• RF Gain: 11dB typically, frequency response less than 1dB (50 to 70 W drive power for rated output).• Primary Power: 85-132 V/170-264 V ac (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps), +10% -15% tol.), 50-60 Hz, single phase, 1200 VA.

• Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations (10 & 12 m band locks provided).

• Size & Weight (operating): WxDxH: 406x315x150mm, 18kg (16x12.4x5.9 inches, 39.7Lbs).

• Operating environments:
   - temperature range: 0...+50 degs.Celsius;
   - humidity: up to 95% @ +35 degs.Celsius.
   - height: up to 3000m above sea level without output deterioration.

Antenna matching can be achieved in less than 10 seconds and at a quarter of nominal output power, which produces lower risk of interference to other stations and greater safety to the amplifier components.

Measured in the ARRL Lab