UNIDEN - UBC-D3600XLT - Handheld scanner receiver

Characteristics:

• FAVORITE SCAN: allows you to organize the systems into favorite lists. The team will simultaneously scan multiple favorite lists and complete databases.
• 4GB microSD CARD: (included) the UBCD3600XLT supports 1GB to 32GB card, for storing favorite lists, profiles, all its settings, discovery sessions and recording sessions.
• RANGE CONTROL: allows you to set how far the scanner will search for channels in favorite lists outside its current location. Location accuracy for departments and sites that allows you to define a location and range using rectangles instead of just a circle.
• TRUNK TRACKER V OPERATION: scans APCO 25 phase 1 and phase 2, DMR, Motorola, EDACS, EDACS ProVoice and LTR trunking systems, as well as conventional analogue and P25 digital channels.
• MULTISITIAL TRUNKING: allows you to program the scanner to share system IDs with trunking at various sites without duplicating IDs.
• SCANNING ONLY CONTROL CHANNELS: With Motorola trunking frequencies, it is not necessary to program the voice channel frequencies.
• INSTANT REPEAT: Play up to 240 seconds (4 minutes) of the most recent transmissions.
• AUDIO RECORDING: capture transmissions for later playback
• PERSONALIZED ALERTS: You can program your scanner to notify you when you receive a channel or unit ID, a Close Call hit, an ID transmitted with an emergency alert or an exit tone hit. For each alert on the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors and 2 flash patterns.
• MULTICOLOR LED ALERT: with its custom alerts, the alert LED can be used with 7 colors.
• TRUNKING DISCOVERY: monitors system traffic on a trunked radio system to find unknown IDs, automatically records audio and registers new channels for later review and identification.
• CONVENTIONAL DISCOVERY: Search for a range of frequencies to find unknown transmissions, automatically record the audio and record new channels for later review and identification.
• SCANNING BY TYPES OF SERVICE: scan your channels by type of service.
• SEARCH SPEED: 80 hops / sec (normal) in search mode (max) except in 5 kHz hops, 250 hops / sec (normal) in search mode (max) – turbo search for 5 kHz jumps.
• SCREEN WITH VARIOUS LEVELS AND KEYBOARD LIGHT: Makes the screen and keyboard easy to see in low light conditions with three lighting levels.
• TEMPORARY OR PERMANENT AVOIDING: for systems, sites, departments and channels
• CHANNEL NUMBER OR SYSTEM LABELING: Number labels allow you to quickly navigate to a list of specific favorites, system or channels.
• START CONFIGURATION: you can program each of your start lists (0-9) for when you start the scanner and press the key number, only the favorite lists assigned to the key will be enabled for scanning.
• CLOSE CALL RF CAPTURE TECHNOLOGY: allows you to configure the scanner to detect and provide information about nearby radio transmissions. Do not disturb Close Call checks the activity of Close Call between channel reception so that the active channels are not interrupted.
• TRANSMISSION DISPLAY: allows the scanner to ignore hits in search and Close Call modes. You can also program up to 10 custom frequency ranges that the device will ignore.
• FIRE TONE OUT TONE-WAIT SEARCH: allows you to configure the scanner to notify you if a sequential two-tone search is transmitted. You can configure up to 32 output tones. It will also search and display unknown tones.
• PC PROGRAMMING: use Sentinel software to manage your scanner profiles, favorites list and firmware updates.
• AGC ANALOGUE AND DIGITAL: helps to automatically balance the volume level between different radio systems.
• PRIORITY-PRIORITY SCANNING C / DND: Priority channels allow you to track activity on your most important channels while monitoring other channels for transmissions.
• PRIORITY ID SCAN: Allows you to set the priority for the IDs of the conversation groups.
• INTERMEDIATE FREQUENCY EXCHANGE: Changes the IF used for a selected channel / frequency to help avoid interference of images and other products on a frequency.
• INDIVIDUAL CHANNEL VOLUME OFFSET: allows you to adjust the volume offset for each channel.
• DEFAULT CONFIGURABLE BANDS: allows you to configure the step: 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50 and 100 kHz, and the modulation: AM, FM, NFM, WFM and FMB for 31 bands different.
• SCAN SEARCH DELAY: set a delay of up to 30 seconds or a forced reset of up to 10 seconds for each channel or search.
• DATA NAME: allows you to name each favorite list, system, site, department, channel, ID, location and personalized search of up to 64 characters.
• DUPLICATED INPUT ALERT: alerts you if you try to enter a duplicate name or a frequency already stored.
• 100 QUICK KEYS: you can scan favorite lists, systems and departments assigned to hot keys.
• SEARCH FOR AVOIDED: You can temporarily avoid up to 250 frequencies and permanently avoid up to 250 frequencies in any search mode or Close Call mode.
• 10 PERSONALIZED SEARCHES: allows you to program and search for 10 customized search ranges.
• SEARCH WITH SCAN OPERATION: allows you to include custom search ranges during the scan operation.
• 3 SEARCH KEYS: You can assign 3 numeric keys to start a custom search, exit tone search or Close Call search.
• QUICK SEARCH: enter a frequency and start searching.
• BATTERY CHARGER INCORPORATED: allows you to charge the batteries in the scanner.

Technical specifications:

• Band coverage: 31 bands
• Scan speed: 85 channels / second
• Speed